Custodial / Anti-Ligature

Anti-ligature and vandal-resistant Tap Spouts & Shower Heads

Ideal for Custodial/Mental Health applications as well as Public/Commercial applications where vandalism might be a risk.

Panel Mounted Models

 
• Made from brass with a nickel plated finish.
• Suitable for water pressures – Minimum: 0.5 bar,Maximum: 6.0 bar.
• Spray angle 25º.
• Integral water flow regulator – 6 Lpm for spout, 10 Lpm for shower head.
• Anti-rotation plate prevents people moving/rotating the spout once it has been fitted.
   

Panel Mounted Version
(suitable for panels up to 40mm thick)

Order code
ALBS-PM Basin Spout
ALSH-PM Shower Head

Cross Wall Mounted Version
(suitable for walls up to 160mm thick)

Order code
ALBS-CW Basin Spout
ALSH-CW Shower Head
     
 

Vandal Resistant
Stainless Steel Tap Spout

Panel Mounted
Order Code: VRTS-PM Tap Spout
     
 

Vandal Resistant
Stainless Steel Bath Spout

Panel Mounted
Order Code: VRBS-PM Bath Spout
     
 

Vandal Resistant
Stainless Steel Shower Head

Panel Mounted
Order Code:VRSH-PM Shower Head
     

Ceiling Mounted Model

     
 

Anti-Ligature Shower Head

Ceiling Mounted
Order Code:
ALCMSH-PM Shower Head
     

Use our TPTS model remote tap sensor kit to provide ‘No-Touch’ sensor operated (or optional touch activated) control of the water flow through the spout.

Deck/Basin Mounted Model
Order code ALT-DM
 

Temperature Blending Valve (Manually Adjustable)

In public areas using a TMV2/3 Thermostatic Mixing Valve (set at 40ºC approx.) is considered suitable to provide safe pre-mixed warm water to an appliance (tap, shower etc). The temperature is not adjustable by the public, only by the building manager.

If however you want to offer your customer the ability to manually adjust the temperature of the water between say 40ºC and cold, then this robust & tamper proof Temperature Blending Valve should be used (NB: We would strongly recommend that you also use a Thermostatic Mixing Valve to safely control the maximum water temperature into the Temperature Blending Valve). We can also supply TMV3 Mixing Valves.

 
 

Order Code TBV/ADJ/22

Application
For 1.5mm – 22mm wall thickness.

Fixing ¾" BSP.
(28mm Ø clearance drill hole)
     
 

Order Code TBV/ADJ/180

Application
For up to 180mm wall thickness.

Fixing ¾" BSP.
(28mm Ø clearance drill hole)
     
 

Order Code TBV/ADJ/280

Application
For up to 280mm wall thickness.

Fixing ¾" BSP.
(28mm Ø clearance drill hole)
     
Typical Installation: Plumbing guidelines for Shower using Temperature Blending Valve