You choose the appliance and let our sensor take control
Features and Benefits
Water Saving
Adjustable valve open timer allows you to optimise water usage.
Turns water off automatically after use.
Anti-Ligature & Vandal Resistant
Ideal for custodial/mental health/public & commercial applications.
Stylish & Discreet
Designers can choose their own appliance. Sensor is fitted remotely. You can also set the system so
you can activate the sensor once to turn the water on and then activate the sensor again to override
the pre-set time and turn the water off immediately.
Optional Purge Facility
You can set an integral (but optional) automatic Purge (valve open period) if an appliance has not
been used for a set period of time to help reduce dead-legs / water stagnation.
"No Touch" Hygienic Sensor Operation
Simply put your hand within 50mm (2") of the sensor to turn water on
Tap Sensors
  |
Tap sensors c/w chrome bezel as standard but optional stainless steel bezels also available. Tap sensors c/w 3 metre cable. Optional blue or red backing discs to show cold or hot water eg if using 2 sensors at a single basin (1 for hot water, 1 for cold water).
|
|
| Waterproof Sensor for Baths, Showers (and Taps) | ||
 |
Waterproof chrome bath / shower
sensor c/w 8 metre cable.
|
|
Sensor Kit Order Codes
c/w Standard High Pressure (HP) solenoid valves; see Low Pressure (LP) options below.
| TAP Control | SHOWER Control | BATH Control |
| Mains powered TPTS-M/HP/1 Tap Sensor kit TPTS-M/HP/2 Tap Sensor kit Battery powered TPTS-B/HP/1 Tap Sensor kit TPTS-B/HP/2 Tap Sensor kit |
Mains powered TPTS-M/HP/1 Shower Sensor kit TPTS-M/HP/2 Shower Sensor kit Battery powered TPTS-B/HP/1 Shower Sensor kit TPTS-B/HP/2 Shower Sensor kit |
Mains powered TPTS-M/HP/1 Bath Sensor kit TPTS-M/HP/2 Bath Sensor kit Battery powered TPTS-B/HP/1 Bath Sensor kit TPTS-B/HP/2 Bath Sensor kit |
1 sensor kit = 1 x control box, 1 x 15mm WRAS approved solenoid valve, 1 x pre-wired sensor
2 sensor kit = 1 x control box, 2 x 15mm WRAS approved solenoid valves, 2 x pre-wired sensors
Electronic Touchpad Switch Operation
Simply press the stainless steel Touchpad Switch to turn water on.
Electronic Touchpad c/w 3 metre cable. Available with blue insert for cold water; red insert for hot water
Touchpad Kit Order Codes
c/w Standard High Pressure (HP) solenoid valves; see Low Pressure (LP) options below.
| TAP Control | SHOWER Control | BATH Control |
| Mains powered TPTS-M/HP/1 Tap Touchpad kit TPTS-M/HP/2 Tap Touchpad kit Battery powered TPTS-B/HP/1 Tap Touchpad kit TPTS-B/HP/2 Tap Touchpad kit |
Mains powered TPTS-M/HP/1 Shower Touchpad kit TPTS-M/HP/2 Shower Touchpad kit Battery powered TPTS-B/HP/1 Shower Touchpad kit TPTS-B/HP/2 Shower Touchpad kit |
Mains powered TPTS-M/HP/1 Bath Touchpad kit TPTS-M/HP/2 Bath Touchpad kit Battery powered TPTS-B/HP/1 Bath Touchpad kit TPTS-B/HP/2 Bat Touchpad kit |
1 touchpad kit = 1 x control box, 1 x 15mm WRAS approved solenoid valve, 1 x pre-wired touchpad switch
2 touchpad kit = 1 x control box, 2 x 15mm WRAS approved solenoid valves, 2 x pre-wired touchpad switches
Control Box
|
 |
||||||||||||
Special Options – Please call to discuss these options before ordering:
a) If you want, you can mix control boxes. EG if you want a shower
control kit with a longer than 3 minute valve open time, you can
use a Bath control box which allows you up to a 10 minute valve
open time.
b) It is possible to use 1 No. sensor to control 2 No. solenoid valves
using a single control box.
c) If fitting sensor/touchpad through a thick (brick) wall, we can
supply optional extension threads to screw onto the sensor/
touchpad to make the overall thread long enough to fit through
the wall. Please confirm total wall thickness when enquiring.
WRAS approved Solenoid Valves/ Water Pressure
Please specify correct solenoid valves for your site conditions
Mains powered kits:
Standard High Pressure (HP) 12v solenoid valves are rated for water
pressure 0.5 bar – 6 bar
Optional Low Pressure (LP) 12v solenoid valves are rated for water
pressure 0 bar – 0.5 bar
Battery powered kits
Standard High Pressure (HP) 6v solenoid valves are rated for water
pressure 0.75 bar – 10 bar
Optional Low Pressure (LP) 6v solenoid valves are rated for water
pressure 0 bar – 2 bar
Optional Very Low Pressure (VLP) 6v solenoid valves are rated for
water pressure 0 bar – 0.5 bar