Robert Pearson & Company 01985 850954 sales@robertpearson.co.uk Robert Pearson & Company 01985 850954
HOME    CONTACT  

Flow Regulators

Water Saving Flow Regulators
Point of use regulators designed to provide constant and maximum flow rates at outlets irrespective of changes in demand or water pressure fluctuations between 1-10 bar. Not suitable for low water pressure systems.
 
Water Flow Regulator
 
Application Suggested Flow Rate
Litres per minute
WC Cistern
Wash Basin
Sink/Shower
Bath		   6 or 8 lpm
6 or 8 lpm
10 or 12 lpm
15 or 18 lpm

Benefits
25% - 50% Water Savings
Even water distribution throughout the site
Lower capital costs (potential savings on smaller pipework & water heating systems etc)
Reduced "Peak Demand”
Ideal for retro-fit or new build projects
Maintenance free. Low cost solution
Combined Isolating Valve & Flow Regulator available in the single fitting
Help prevent "back splash" at basins

 

Models

All these have integral flow regulators
Flow Regulators
A. Flow Regulator
Order Code: RP/GA
Will fit into most standard 15mm compression valves. 		B. Internal Tap Regulator
Order Code: RP/ITFR

Simply fit in seating of tap (Please specify whether tap seating is BS1010 or 10mm, 11mm, 12mm).
 
C. Combined Aerator & Flow Regulator
Order Code: RP/CAAFR

Simply replace existing tap aerator with this unit.
  		D. ½" MxF Shower Flow Regulator
Order Code: RP/SFR/DW

No plumbing simply screws in between shower head & ½" supply pipe.
 
E. MxF Housings for Tap Tails
Order Code: RP/DWSA/TTFR

Simply screw on to tap tails. Available in 1/2".
  		G. In-Line Coupler
Order Code: RP/CAFR

Available in 15mm & 22mm sizes.
 
Access Valve
 
Indicators: coloured caps
4lpm =  pink     6lpm =  grey    
8lpm =  white     10lpm =  yellow    
12lpm =  brown     15lpm =  blue    
18lpm =  green    
Combined Isolating Valve & Flow Regulator
Order Code: RP/ACC VALVE

With access port on side of valve to allow removal of flow regulator cartridge (and optional strainer) without draining down system or breaking pipework - eg picture on front page. WRC approved. Identity label to clearly show flow rate of cartridge used.
 
Available in either 15mm or 22mm sizes
 
Flow rates for either size can be any of: 4,6,8,10,12,15 or 18 Litres per minute
 
Optional Strainer facility available on request.
Available in nickel plated finish.
Optional handles on request.

© 2005 Robert Pearson & Company Privacy Policy | Terms & Conditions