 |
|
|
|
 |
Controlling limescale with Hydroflow |
|
| The most advanced development in the fight against encrusting limescale.
|
|
 |
Effective on all types of pipework. |
|
|
Maintenance Free - just fit and forget. |
|
|
Easy to Install - no plumbing or chemicals required. Ideal for both new build and retro fit projects. |
 |
The Problem
Limescale builds up in heat exchangers, pipes, pumps, boilers and appliances connected to the system. This usually results in reduced flow rates, loss of efficiency and early failure of components. Just 3mm of encrusting limescale adds approximately 20% to your heating bills!
The Solution
Hydroflow not only prevents the build-up of encrusting limescale in plumbng systems, but it also helps remove encrusting limescale. Thus Hydroflow:-
|
Saves energy and reduces heating costs. |
|
|
Reduces maintenance costs and "downtime". |
|
|
Prolongs the life of plumbing and heating equipmemt. |
|
|
|
|
Hydroflow Commercial Product Details |
|
|
C45 for pipes up to 45mm o/d
C60 for pipes up to 60mm o/d
C100 for pipes up to 100mm o/d
C120 for pipes up to 120mm o/d
C160 for pipes up to 160mm o/d
|
Hydroflow Works... Consistently
Hydroflow water conditioners are unique, no other product works the same way. Based on advanced technology integrating ferrite with solid state electronics, Hydroflow transmits a powerful signal longitudinally throughout the entire plumbing system continually treating the water 24 hours a day. The signal works both up and down stream even in no flow conditions ensuring consistent and reliable protection.
Most Vulnerable Area... Protected
Hydroflow is installed close to the area where the most encrusting limescale is created, at the point of the heat exchange or pressure change. This ensures that maximum protection is given to the most vulnerable area. However, since the signal travels everywhere in the system, all parts are protected.
Technically Minded...?
Randomly varying electric fields are induced into the water and propergate throughout the entire plumbing system. These electric fields cluster the ions in the hard water resulting in the production of nuclei (seed crystals) everywhere in the system. When water is heating the resulting precipitate that usually deposits on hot surfaces as encrusting limescale, grows in suspension and is then washed away in the flow. The fields treat the water both up and down stream and will also transmit to the primary circuit. The treated water is normally able to dissolve existing scale in just a few weeks.
Installation...Made Easy
The compact tranducer unit fits all types and sizes of pipework, from 30mm to 200mm O/D. Designed for easy installation, the unit simply straps around the pipe and is connected through the power unit (PSU) to the mains supply with the cables / connectors supplied.
|
|
|
|
| MODEL |
|
Max pipe O/D
mm |
|
Universal Input
Range (PSU) |
|
Input Current Ma |
|
Dimensions
mm |
|
Weight
kg |
| min |
max |
|
|
|
C45
C60
C100
C120
C160 |
|
45
60
100
120
160-200 |
|
all models
90 to 260 VAC / 47-63Hz |
|
20
31
20
29
32 |
78
89
78
83
92 |
|
all models
Length 250mm
Depth 138mm
Height 72mm |
|
4
4
5
5
6 |
|
|
Installation Tips
|
Do not fit Hydroflow on the water supply pipe into a cold water storage tank. The signal will be lost with little or no benefit. |
|
|
Fit Hydroflow after any booster sets or pumps. |
|
|
If fitting Hydroflow to pipes that will get hotter than 55oC, you must use non metallic insulation to protect Hydroflow. |
|
Domestic Hydroflow models also available
Hydroflow HS34 ...for combi boilers Hydroflow HS38 ...for stored hot water
Specifications for domestic models
 |
|
Activity monitor light operated by feed back to show correct operation. |
|
|
Manufactured to ISO9000 and meets all standards. |
|
|
Reliable solid state circuits. |
|
|
12 VAC. 100ma. |
|
|
Maximum power: 1.2 watts. |
|
|
Weight approx.: 175 grams. |
|
|
Height: 110mm / Width: 67mm / Depth: 30mm |
|
|
|
|
