Sensor Taps

Automatic "No-Touch" Sensor Operated Taps

EARN EXTRA BREEAM POINTS BY FITTING SENSOR TAPS.

• Hygienic “Touch-Free” Sensor Operation • Up to 70% water savings
• Mains or battery powered kits available   • Ideal for Disabled Facilities
• “Control of Infection”   • Reliability

To operate simply put your hands in front of the sensor. Remove your hands and the tap will automatically turn itself off again after a few seconds.

Examples of Facilities Using Sensor Taps

Office
Office
 Office

Office Sensor Taps
     
Restaurant
Restaurant Sensor Taps		 Restaurant
 Theatre
Theatre Sensor Taps
     
Bar
Bar Sensor Taps		 Shopping Centre
Shopping Centre Sensor Taps		 Mobile
Mobile Sensor Taps
     

Section A - Sensor Taps

BSNST basin or worktop model (Chrome finish)

 
Order Code   Description
BSNST-B   Battery powered chrome sensor tap kit.
BSNST-M   Mains powered version.
     
Sensor at tap base.
Chrome tap.
3/4" BSP thread.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.5 bar - 5 bar.
     
BBT model (Chrome finish)

 
Order Code   Description
BBT-B   Battery powered kit.
BBT-M   Mains powered version.
     
Tap base: 55mm.
1/2" BSP thread.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.5 bar - 5 bar.
     
KST model (Chrome finish)

 
Order Code   Description
KST-B   Battery powered kit.
KST-M   Mains powered version.
     
Tap base: 55mm.
Needs min. 35mm hole in basin or worktop.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.5 bar - 5 bar.
     

Section B - Sensor Taps

All models listed below require the following fixing:
Fixing ¾” BSP. (28mm Ø clearance drill hole)		    
     
CMT basin or worktop model (Chrome finish)

 
Order Code   Description
CMT-B   Battery powered chrome sensor tap kit.
CMT-M   Mains powered version.
     
Sensor at tap base.
Chrome tap. ¾” BSP thread.
Tap base: 57mm diameter.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     
SS32 worktop/basin mounted model (Stainless steel)

 
Order Code   Description
SS32-B   Battery powered stainless steel sensor tap kit. 38mm diameter spout.
SS32-M   Mains powered version.
     
Tap is at 32º angle from worktop.
Sensor at spout end. Stainless steel tap. ¾” BSP thread.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     
SS45 worktop/basin mounted model (Stainless steel)

 
Order Code   Description
SS45-B   Battery powered stainless steel sensor tap kit. 38mm diameter spout.
SS45-M   Mains powered version.
     
Tap is at 45º angle from worktop.
Sensor at spout end. Stainless steel tap. ¾” BSP thread.
Tap base: 50 mm diameter.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     
SSTW wall/panel mounted model (Stainless steel)

 
Order Code   Description
SSTW-B   Battery powered wall/panel mounted sensor tap kit. 38mm spout diameter.
SSTW-M   Mains powered version.
     
Tap spout can be built to 200mm or 250mm, overall length on request.
Tap should be fitted on wall at a minimum of 300mm higher than bottom of basin. 3/4” BSP thread.
Longer thread available on request.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     

FOR HOSPITALS
SSTW (Scrub) model for surgeon scrub-up sinks with a 20 second water run-on, please call us to discuss this option.
Taps can come with copper tails if preferred to flexi-hose pipe.

Re: Wall mounted Sensor Taps: We can make the tap spout projection longer for you if required.

SSHN High-neck model (Stainless steel)

 
Order Code   Description
SSHN-B   Battery powered stainless steel sensor tap kit. 38mm diameter spout.
SSHN-M   Mains powered version.
     
Sensor at spout end.
Stainless steel tap. 3/4 ” BSP thread.
Tap base: 50mm diameter.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     
SSSN Short-neck model (Stainless steel)

 
Order Code   Description
SSSN-B   Battery powered stainless steel sensor tap kit. 38mm diameter spout.
SSSN-M   Mains powered version.
     
Sensor at spout end.
Stainless steel tap. 3/4” BSP thread.
Tap base: 50mm diameter.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     
CPTHN High-neck model pillar tap (Chrome)

 
Order Code   Description
CPTHN-B   Battery powered chrome sensor tap kit.
CPTHN-M   Mains powered version.
     
Tap base: 55 mm diameter.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     
CPTSN Short-neck model pillar tap (Chrome)

 
Order Code   Description
CPTSN-B   Battery powered chrome sensor tap kit.
CPTSN-M   Mains powered version.
     
Tap base: 55 mm diameter.
Solenoid value for 15mm pipe size.
Suitable for water pressure 0.75 bar - 10 bar.
Optional low pressure valve also available on request.
     

Section B - General Specification

For all sensor tap kits:

Each tap kit c/w:
WRAS approved 15mm solenoid valve and tap with integral sensor. Battery powered models come
with a separate battery pack and require no electricity supply at all. Mains powered kits come with a separate low voltage 6V dc PSU/Transformer Unit.

Electrical requirements:
For mains powered kits a single 3 amp fused spur can power up to 3 no. taps (in a row).

Stainless steel taps:
Standard finish is “brushed” stainless steel. Optional “polished” stainless steel finish also available.

Optional purge facility:
To automatically purge taps not used for long periods (not available on all taps).

NB
Please make sure that there are no lights shining (or being reflected) directly into the sensor as this can make the tap false trigger. Yellow "Hi-Viz" jackets are extremely reflective and can cause taps to false trigger. Shiny metal basins are very reflective. Only fit sensor taps to these basins at your own risk.

Taps come supplied with PEX lined WRAS approved flexi-hose pipes. Optional copper tails available on request.