Robert Pearson & Company 01985 850954 sales@robertpearson.co.uk Robert Pearson & Company 01985 850954
HOME    CONTACT  

Sensor Taps

Automatic "No-Touch" Sensor Operated Taps
Hygienic “Touch-Free” Sensor Operation Up to 70% water savings
Mains or battery powered kits available   Ideal for Disabled Facilities
“Control of Infection”   Reliability

To operate simply put your hands in front of the sensor. Remove your hands and the tap will automatically turn itself off again after a few seconds.
 

Examples of Facilities Using Sensor Taps
 
 
 
Office

Office Sensor Taps
 Mobile

Mobile Sensor Taps		 Theatre

Theatre Sensor Taps
Bar

Bar Sensor Taps		 Shopping Centre

Shopping Centre Sensor Taps		 Restaurant

Restaurant Sensor Taps

 

Models Available
BSNST basin or worktop model (Chrome finish)

BSNST basin or worktop model (Chrome finish)
 
Order Code
BSNST-B
BSNST-M		  
Description
Battery powered chrome sensor tap kit.
Mains powered version.

Sensor at tap base.
Chrome tap.
3/4" BSP thead.

BBT model (Chrome finish)

BBT Sensor Tap
 
Order Code
BBT-B
BBT-M		  
Description
Battery powered kit.
Mains powered version.

Tap base: 55mm.
1/2" BSP thead.

KST model (Chrome finish)

KST Sensor Tap
 
Order Code
KST-B
KST-M		  
Description
Battery powered kit.
Mains powered version.

Tap base: 55mm.
Needs min. 35mm hole in basin or worktop.

 
CMT basin or worktop model (Chrome finish)

CMT basin or worktop model (Chrome finish)
 
Order Code
CMT-B
CMT-M		  
Description
Battery powered chrome sensor tap kit.
Mains powered version.

Sensor at tap base.
Chrome tap. ¾” BSP thread.
Tap base: 57mm diameter.

 
SS32 worktop/basin mounted model (Stainless steel)

SS32 worktop/basin mounted model (Stainless steel)
 
Order Code
SS32-B
 
SS32-M		  
Description
Battery powered stainless steel sensor tap kit. 38mm diameter spout.
Mains powered version.

Tap is at 32º angle from worktop.
Sensor at spout end. Stainless steel tap. ¾” BSP thread.

 
SS45 worktop/basin mounted model (Stainless steel)

SS45 worktop/basin mounted model (Stainless steel)
 
Order Code
SS45-B
 
SS45-M		  
Description
Battery powered stainless steel sensor tap kit. 38mm diameter spout.
Mains powered version.

Tap is at 45º angle from worktop.
Sensor at spout end. Stainless steel tap. ¾” BSP thread.
Tap base: 50 mm diameter.

 
SSTW wall/panel mounted model (Stainless steel)

SSTW wall/panel mounted model (Stainless steel)
 
Order Code
SSTW-B
 
SSTW-M		  
Description
Battery powered wall/panel mounted sensor tap kit. 38mm spout diameter.
Mains powered version.

Tap spout can be built 200mm or 250mm overall length on request
Tap should be fitted on wall 300mm minimum higher than bottom of basin. 3/4” BSP thread.
Longer thread availabe on request.
 
NEW FOR HOSPITALS! SSTW (Scrub) model for surgeon scrub-up sinks with (a) 20 second water run-on and (b) 250mm overall tap length. Please call us to discuss this option.
 
Re: Wall mounted Sensor Taps:We can make the tap spout projection longer for you if required.

 
SSHN High-neck model (Stainless steel)

SSHN High-neck model (Stainless steel)
 
Order Code
SSHN-B
 
SSHN-M		  
Description
Battery powered stainless steel sensor tap kit. 38mm diameter spout.
Mains powered version.

Sensor at spout end.
Stainless steel tap. 3/4 ” BSP thread.
Tap base: 50mm diameter.

 
SSSN Short-neck model (Stainless steel)
SSSN High-neck, shortened neck model (Stainless steel)
Order Code
SSSN-B
 
SSSN-M		 Description
Battery powered stainless steel sensor tap kit. 38mm diameter spout.
Mains powered version.

Sensor at spout end.
Stainless steel tap. 3/4” BSP thread.
Tap base: 50mm diameter.

 
 

General Specification
For all sensor tap kits:
 
Each tap kit c/w:
15mm solenoid valve and tap with integral sensor. Battery powered models come with a separate battery pack and require no electricity supply at all. Mains powered kits come with a separate low voltage 6v dc PSU/Transformer unit.
 
Water pressure:
The standard solenoid valve is suitable for water pressures of 0.5 bar - 8.0 bar. We also offer an optional low pressure valve. Please contact us to discuss this option.
 
Electrical requirements:
For mains powered kits a single 3amp fused spur can power up to 3 No. taps (in a row)
 
Stainless steel taps:
standard finish is “brushed stainless steel”. We can offer an optional “polished stainless steel” finish if specified.
 
NB:
Please make sure that there are no lights shining (or being reflected) directly into the sensor as this can make the tap false trigger. Yellow "Hi-Viz" jackets are extremely reflective and can cause taps to false trigger. 		Battery Powered Options

© 2005 Robert Pearson & Company Privacy Policy | Terms & Conditions