+44 (0)1985 850 954

sales@robertpearson.co.uk

Sensor Taps

Automatic "No-Touch" Sensor Operated Taps.

Can help you achieve BREEAM Wat 1 credits

  • Hygienic "Touch-Free" Sensor Operation
  • Up to 70% water savings
  • Mains or battery powered kits available
  • Ideal for Disabled Facilities
  • "Control of Infection"
  • Reliability

To operate simply put your hands in front of the sensor. Remove your hands and the tap will automatically turn itself off again after a few seconds.

Restaurant

Restaurant Sensor Taps

Restaurant

Tap

Theatre

Theatre Sensor Taps

Bar

Bar Sensor Taps

Shopping Centre

Shopping Centre Sensor Taps

Office

Office Sensor Taps

Standard flowrate is 5 Lpm. These taps can be fitted with lower or higher flow rated regulators if required. Please call for further information.

All models listed below require the following fixing: Fixing ¾" BSP. (28mm Ø clearance drill hole)

CSN Model

CSN basin or worktop model (chrome finish)

Order Code: CSN-B
Battery powered kit.

Order Code: CSN-M
Mains powered version. 

  • Sensor at tap base.
  • Chrome tap. ¾" BSP thread.
  • Tap base: 57mm diameter.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

CMT Model

CMT basin or worktop model (Chrome finish)

Order Code: CMT-B
Battery powered chrome kit.

Order Code: CMT-M
Mains powered version.

  • Sensor at tap base.
  • Chrome tap. ¾" BSP thread.
  • Tap base: 57mm diameter.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

SS32 Model

SS32 worktop/basin mounted model (Stainless steel)

Order Code: SS32-B
Battery powered kit. 38mm diameter spout.

Order Code: SS32-M
Mains powered version.

  • Tap is at 32º angle from worktop.
  • Sensor at spout end. Stainless steel tap. ¾" BSP thread.
  • Tap base: 50 mm diameter.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

SS45 Model

SS45 worktop/basin mounted model (Stainless steel)

Order Code: SS45-B
Battery powered kit. 38mm diameter spout.

Order Code: SS45-M
Mains powered version.

  • Tap is at 45º angle from worktop.
  • Sensor at spout end. Stainless steel tap. ¾" BSP thread.
  • Tap base: 50 mm diameter. 
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

SSTW 150mm Model
(150mm Long Spout)

  

SSTW wall/panel mounted model (Stainless steel)

Order Code: SSTW-B / 150mm
Battery powered kit. 38mm spout diameter.

Order Code: SSTW-M / 150mm
Mains powered version.

  • Tap should be fitted on wall at a minimum of 300mm higher than bottom of basin. 3/4" BSP thread.
  • Longer thread available on request.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

SSTW 200mm Model
(200mm Long Spout)

SSTW wall/panel mounted model (Stainless steel)

Order Code: SSTW-B / 200mm
Battery powered kit. 38mm spout diameter.

Order Code: SSTW-M / 200mm
Mains powered version.

  • Tap should be fitted on wall at a minimum of 300mm higher than bottom of basin. 3/4" BSP thread.
  • Longer thread available on request.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

SSTW 250mm Model
(250mm Long Spout)

SSTW wall/panel mounted model (Stainless steel)

Order Code: SSTW-B / 250mm
Battery powered kit. 38mm spout diameter.

Order Code: SSTW-M / 250mm
Mains powered version.

  • Tap should be fitted on wall at a minimum of 300mm higher than bottom of basin. 3/4" BSP thread.
  • Longer thread available on request.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

SSHN High-neck Model

SSHN High-neck model (Stainless steel) 

Order Code: SSHN-B
Battery powered kit. 38mm diameter spout.

Order Code: SSHN-M
Mains powered version.

  • Sensor at spout end.
  • Stainless steel tap. 3/4 " BSP thread.
  • Tap base: 50mm diameter.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

SSSN Short-neck Model

SSSN Short-neck model (Stainless steel)

Order Code: SSSN-B
Battery powered kit. 38mm diameter spout.

Order Code: SSSN-M
Mains powered version.

  • Sensor at spout end.
  • Stainless steel tap. 3/4" BSP thread.
  • Tap base: 50mm diameter.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

CPTHN High-neck Model

CPTHN High-neck model pillar tap (Chrome)

Order Code: CPTHN-B
Battery powered kit.

Order Code: CPTHN-M
Mains powered version.

  • Tap base: 55 mm diameter.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

CPTSN Short-neck Model

CPTSN Short-neck model pillar tap (Chrome)

Order Code: CPTSN-B
Battery powered kit.

Order Code: CPTSN-M
Mains powered version.

  • Tap base: 55 mm diameter.
  • Solenoid value for 15mm pipe size.
  • Suitable for water pressure 0.75 bar - 10 bar.
  • Optional low pressure valve also available on request.

Programmer

Optional hand held programmer to allow you to alter:

  • Water run-on time per operation
  • Sensitivity
  • Optional automatic purge facility (to help reduce dead-legs)
  • Optional 2 minute valve open chlorination facility
  • Lock Out

General Specification

For all sensor tap kits:

Each tap kit c/w:

  • WRAS approved 15mm solenoid valve and tap with integral sensor.
  • Battery powered models come with a separate battery pack and require no electricity supply at all.
  • Mains powered kits come with a separate low voltage 6V dc PSU/Transformer Unit.

Electrical requirements:
3 amp fused spur.

Stainless steel taps:
Standard finish is "brushed" stainless steel. Optional "polished" stainless steel finish also available.

Optional purge facility:
To automatically purge taps not used for long periods (not available on all taps).

NB

Please make sure that there are no lights shining (or being reflected) directly into the sensor as this can make the tap false trigger. Yellow "Hi-Viz" jackets are extremely reflective and can cause taps to false trigger. Shiny metal basins are very reflective. Only fit sensor taps to these basins at your own risk.

Taps come supplied with PEX lined WRAS approved flexi-hose pipes. Optional copper tails available on request.