+44 (0)1985 850 954

sales@robertpearson.co.uk

Anti-Ligature Taps

Anti-ligature and/or vandal-resistant Tap Spouts & Shower Heads.

Ideal for Custodial/Mental Health applications as well as Public/Commercial applications where vandalism might be a risk.

Use our Anti-Ligature "TPTS" model remote "No-Touch" Sensors or electronic Touchpad Switches to control the water flow to these spouts.

Panel Mounted Models

Anti-Ligature Tap Spouts and Anti-Ligature Shower Heads

  • Made from brass with a nickel plated finish.
  • Suitable for water pressures – Minimum: 0.5 bar, Maximum: 6.0 bar.
  • Spray angle 25º.
  • Integral water flow regulator – 6 Lpm for spout, 8 Lpm for shower head.
  • Anti-rotation plate prevents people moving/rotating the spout once it has been fitted.

Panel Mounted Version (suitable for panels up to 40mm thick)

Basin Spout
Order code ALBS-PM

Shower Head
Order Code ALSH-PM

Vandal Resistant Stainless Steel Tap Spout

Panel Mounted Tap Spout
Order Code: VRTS-PM

Vandal Resistant Stainless Steel Bath and Tap Spout

Panel Mounted Bath Spout
Order Code: VRBS-PM

Panel Mounted Tap Spout Complete with 5lpm Flow Regulator
Order Code: VRBS(Tap)-PM

Vandal Resistant Stainless Steel Shower Head

 

Panel Mounted Shower Head
Order Code: VRSH-PM

Anti-Ligature Shower Head - Ceiling Mounted Model

 

Ceiling Mounted Shower Head
Order Code: ALCMSH-PM

Anti-Ligature Stainless Steel Basin Spout - Deck/Basin Mounted Model

Order Code: ALN-DM V2

Temperature Blending Valve (Manually Adjustable)

 

In public areas using a TMV2/3 Thermostatic Mixing Valve (set at 40ºC approx.) is considered suitable to provide safe pre-mixed warm water to an appliance (tap, shower etc). The temperature is not adjustable by the public, only by the building manager.

If however you want to offer your customer the ability to manually adjust the temperature of the water between say 40ºC and cold, then this robust & tamper proof Temperature Blending Valve should be used (NB: We would strongly recommend that you also use a Thermostatic Mixing Valve to safely control the maximum water temperature into the Temperature Blending Valve). We can also supply TMV3 Mixing Valves.

This is not an on/off control. It is a device for manually changing the water temperature.

 

Order Code TBV/ADJ/22

Application
For 1.5mm – 22mm wall thickness.

Fixing ¾" BSP.
(28mm Ø clearance drill hole)

Order Code TBV/ADJ/180

Application
For up to 180mm wall thickness.

Fixing ¾" BSP.
(28mm Ø clearance drill hole)

Order Code TBV/ADJ/280

Application
For up to 280mm wall thickness.

Fixing ¾" BSP.
(28mm Ø clearance drill hole)

Typical Installation: Plumbing guidelines for Shower using Temperature Blending Valve